Property
Specifications
Voltage
Horse Power
Amps
Max. Head (ft.)
Max. Flow (GPH)
Discharge Size (in.)
Power cord length (ft.)
Model: PEP033
TECHNICAL SPECIFICATIONS
PERFORMANCE
Model
PEP033
GPH of water @ Total Ft. Head
Max.
Head
115V/60Hz
1/3HP
4.3A
18 ft.
3270@5ft
1-1/4 in.
10 ft.
5 ft. 10 ft. 15 ft. 20 ft.
3270 2560 1740 - 18ft
SAFETY INFORMATION
WARNING
This pump motor is not submersible. Do not submerge the motor or allow motor to be exposed to
water. Personal injury and/or death from electrical shock could result.
Do not use this unit to pump chemicals, flammable liquids, sewage or corrosive liquids. You could injure
yourself and the pump will fail. Pumping these types of liquids voids the warranty.
Water and electricity can be dangerous if certain precautions are not adhered to. This pump is
designed to operate perfectly safe in a water environment; however, improper use and installation
can result in personal harm from electrical shock. Please pay attention to the following warnings.
Never touch any electrical device, including this pump, when it is touching water, in water, or even
in a moist environment. Always unplug (disconnect the electricity) when servicing or installing the
unit.
RISK OF ELECTRICAL SHOCK. This pump is supplied with a grounding conductor and grounding
-type attachment plug. To reduce the risk of electrical shock, be certain that it is connected only to
a properly grounded, grounding-type receptacle.
Do not use the power cord or discharge hose to carry or handle the pump. Doing so may caus
damage to the power cord or discharge hose.