TROUBLESHOOTING
Note: Do not disassemble the motor housing. This motor has NO repairable internal parts,
and disassembling may cause an oil leak or dangerous electrical wiring issues.
Problem Possible Cause Corrective Action
Pump does
not start or
run
Pump cannot
pump water
out
1.Blown fuse
2.Tripped breaker
3.Plug disconnected
4.Thermal overload
5.Corroded plug
6.Motor failed
1.Replace fuse
2.Reset breaker
3.Secure plug
4.Unplug the pump for 30 minutes,
then plug in
5.Clean plug prongs
6.Call 833-290-1189
1.Clean screen
2.Straighten hose
3.Clean airlock release feature
4.Use larger diameter hose
5.Use shorter hose
6.Reassemble impeller
7.Call 833-290-1189
1.Screen blocked
2.Hose kinked, bent sharply, or coiled
3.Airlock
4.Hose diameter too small
5.Hose length too long
6.Impeller loose on shaft
7.Impeller broken
6
To Next Page
Loading...
Need help?
General
