What does 'AIS: Rx channel 1 malfunction' mean on my ACR Electronics GPS?
If your ACR Electronics GPS displays 'AIS: Rx channel 1 malfunction', it indicates an internal error. If this alarm reoccurs regularly, the transponder unit requires replacing.
What does 'AIS: General failure' mean on my ACR Electronics GPS?
If your ACR Electronics GPS shows 'AIS: General failure', it indicates an internal error. The transponder unit requires replacing.
Outlines general requirements and points to observe before installing the NAUTICAST™.
Provides a step-by-step procedure for the installation process of the NAUTICAST™.
Explains the technical specifications for sensor interfaces like talker drive circuits.
Describes the hardware installation process for RS422 serial interfaces.
Guides through the sensor software configuration options and setup.
Covers the installation procedures and considerations for VHF and GPS antennas.
Instructions for entering essential MMSI and IMO numbers during initial setup.
General| Brand | ACR Electronics |
|---|---|
| Model | AIS |
| Category | GPS |
| Language | English |
To Next Page