ACR Electronics RCL-100 - User Manual

Y1-03-0138R i

Summary

SECTION 1 - FOREWORD

SECTION 2 - GENERAL

SECTION 3 - SEARCHLIGHT

Mounting

Instructions for mounting the Searchlight, including fastener requirements, gasket use, and obstruction clearance.

SECTION 4 - REMOTE CONTROL SYSTEM

SECTION 5 - URP-102 POINT PAD TM

Case Options

Information on switching between surface and flush mount options for the URP-102 Point Pad unit.

Mounting

Step-by-step guide for installing the URP-102 Point Pad in either surface or flush mount configurations.

Connecting to the Master Controller

Explanation of how the Point Pad communicates with the Master Controller via coaxial cable.

SECTION 6 - URC-102 MASTER CONTROLLER

Mounting

Guidance on where and how to mount the Master Controller, considering protection and cable routing.

General Wiring Scheme

Explanation of the RCL-100's wiring scheme and fuse requirements for the Master Controller.

APPENDIX A - RCL-100 D SPECIFICATIONS

APPENDIX B - USER REPLACEABLE PARTS

APPENDIX C - BULB REPLACEMENT PROCEDURE

APPENDIX D - PRODUCT COMPONENTS

APPENDIX E - ACCESSORY COMPONENTS

APPENDIX F - WARRANTY, USEFUL LIFE POLICY, NOTICES

Limited Warranty

Details of the factory defect warranty for the product, including coverage, duration, and service contact information.

Useful Life Policy

Information on the expected typical service life of the product and servicing policy.

Notices

Disclaimers regarding manual accuracy, copyright, and product improvement policies.

EC DECLARATION OF CONFORMITY

ACR Electronics RCL-100 Specifications

General

Model	RCL-100
Category	Flood Light
Material	UV resistant Housing
Rotation Angle	360 degrees
Light Output	55, 000 cd
Power Source	DC