Need help?Do you have a question about the ACT AC2300 and is the answer not in the manual?
General| Capacity | 2300VA / 1380W |
|---|---|
| Output Power | 1380W |
| Topology | Line Interactive |
| Waveform Type | Simulated Sine Wave |
| Interface Port | USB |
| Form Factor | Tower |
| Input Frequency | 50/60Hz |
| Output Frequency | 50/60Hz |
| Battery Backup Time | Varies by load |
| Transfer Time | 4-6 ms |
| Device Type | Line Interactive UPS |
| Input Voltage | 220-240VAC |
| Output Voltage | 220-240VAC |
Details the product's capabilities and backup functions for data protection during power failures.
Lists the items included in the UPS package for user verification.
Explains how the UPS filters AC power, charges the battery, and supplies the connected equipment.
Describes how the battery supplies power to the inverter during an AC power outage.
Details the number and type of outputs for surge protection and battery backup on AC2300 and AC2305 models.
Covers the battery charging time and procedures for optimal battery health and longevity.
Explains how the UPS automatically turns on/off and supplies power during AC failures and recovery.
Describes battery discharge protection and short-circuit protection mechanisms within the UPS.
Details the audible alarms for AC failure, low battery, overload, and fault conditions.
Explains how the system synchronizes output waveform with AC voltage for reduced interference.
Describes the UPS's ability to automatically set its frequency to 50Hz or 60Hz based on AC input.
Outlines monthly checks to ensure the UPS is clean, ventilated, and properly connected for optimal performance.
Provides steps for checking battery health by simulating AC failure and measuring discharge time.
Offers troubleshooting steps for common UPS issues like power supply failure or non-response.
To Next Page