ACTinBlack Europe S.à r.l. Rev 1.0, May 2020 2
The DTNVS is designed for differences in the
physical features of individuals. This allows for a
wide range of operators to use the system safely and
comfortably. Some of these design features are the
power switch, eye relief adjustment, dioptre
adjustment, and objective focus. Lightweight and
versatile, the DTNVS can be hand-held, head-
mounted, helmet-mounted.
The DTNVS consists of two identical monoculars
mounted to a body assembly. The monoculars may
be pivoted sideways (when pivoted outside the field
of view, the monocular will individually turn off.)
When the DTNVS is mounted to a helmet or head
mount, the DTNVS may be flipped up and
temporarily stowed, the DTNVS will automatically
go into Standby Mode turning off the monoculars.
The DTNVS will automatically Turn On when
flipped down again. Each monocular is comprised
of three identical primary subassemblies: objective
lens assembly, monocular housing with image
intensifier assembly and eyepiece lens assembly.
To Next Page
Loading...