EasyManua.ls Logo

ACT DTNVS - Checking for Damage and Corrosion

ACT DTNVS
43 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ACTinBlack Europe S.à r.l. Rev 1.0, May 2020 24
4.7 Neck Cord:
If the neck cord becomes frayed or broken, cut it off
or untie the knot at the attachment points and pull
free. To install a new cord. Thread the ends through
the holes next to the dovetail back to front and tie a
knot.
4.8 Tension Adjustment Screws:
If the tension of the arms drops over the lifetime of
the device, only a technician, officially approved by
ACTinBlack shall adjust the tension of the system.
The tension can be readjusted and friction washers
can be swapped if necessary by a technician
officially approved by ACTinBlack.
CAUTION
If tension screws are over tightened, this may
result in irreparable damage to the device.