EasyManua.ls Logo

ACT DTNVS - CHAPTER 4: MAINTENANCE INSTRUCTIONS

ACT DTNVS
43 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ACTinBlack Europe S.à r.l. Rev 1.0, May 2020 22
CHAPTER 4:
MAINTENANCE INSTRUCTIONS
4.1 Introduction:
The DTNVS is designed to be used in diverse
environments and rugged conditions. It is recommended
that regular and simple maintenance be performed for
optimal system performance.
CAUTION
The binocular is a precision electro-optical
instrument and must be handled carefully.
Do not scratch the external lens surfaces or touch
them with your fingers.
Wiping demist shield with lens tissue while wet or
with wet lens tissue can damage the coating.
4.2 Deactivation:
Power down the system by turning the power switch
knob to OFF.
4.3 Battery Removal:
Open battery compartment, remove battery and store in
carrying case. Close the battery compartment before
cleaning.
4.4 Cleaning the DTNVS:
When necessary, use a moist clean cloth to wipe the outside
of the unit, EXCEPT FOR THE OPTICAL SURFACES.
Be sure to wipe away excess dirt and dust that may restrict
the performance of and damage moving and mating parts.
If needed, the use of a very diluted detergent solution is