Need help?Do you have a question about the Actelis ML600 and is the answer not in the manual?
General| Power over Ethernet (PoE) | No |
|---|---|
| Layer | Layer 2 |
| Operating Temperature | -40°C to +75°C |
| Management | Web, CLI, SNMP |
| Standards Compliance | IEEE 802.3, IEEE 802.1Q, IEEE 802.1p |
| MAC Address Table | 8K entries |
| Model | Actelis ML600 |
Legal notice regarding copyright and distribution of the publication.
Describes limitations and warranties for Actelis Networks products.
Information on obtaining support, sales, service, and training.
Lists registered trademarks and copyrights of Actelis Networks.
Information on patents protecting the described products.
Instructions for providing comments and suggestions about the document.
Details about the document's version, revision, and date.
States compliance with FCC rules for Class B digital devices.
States compliance with Canadian interference-causing equipment regulations.
Provides essential safety precautions for using the product.
Guidelines to prevent damage from static electricity.
Procedures for opening the package and checking contents.
Details on physical and electrical requirements for the ML600.
Provides a flowchart of installation tasks.
Explains how to configure the system using dipswitches.
Describes different methods for mounting the ML600 unit.
Details on connecting power and signals to the ML600.
Information on connecting various interfaces on the ML600.
Steps to power on and initialize the ML600 system.
Information on the proper disposal of the product according to WEEE directive.
To Next Page