The torque wrenches must be replaced every year.
4.5 Install an LED ring
Connect the light ring to the Newtron LED handpiece, making sure that the polarity of the light ring is correct:
1. Align the "+" marks on the light ring and on the body of the handpiece close to the electrical contacts of the light
ring
2. Insert the optical guide into the Newtron LED handpiece nosepiece.
3. Screw on the handpiece nosepiece.
Page 10/28 - User Manual | handpiece Newtron LED | J12611 | V4 | (07) | 01/2021 | NB62EN020D
To Next Page
Loading...
