ACTi D21FA - Mounting Options

www.acti.com
Hardware Manual
16
Mounting Options
The camera can be installed both indoors and outdoors. For outdoor installation, additional
waterproof housing is required. Below are several mounting options that you can use to install the
camera. Select the most suitable solution for your installation environment.
Mount Types
Accessories
Ceiling or Wall
(Indoor)
The camera comes with a mounting block which is used to
mount an additional bracket to complete the installation. The
additional bracket is not included in the camera package. You
may use the bracket from a local supplier or purchase ACTi’s
indoor bracket.
See Indoor Installation Procedures on page 17 for more
information.
PMAX-1104
Wall
(Outdoor)
A waterproof housing is required when installing the camera
outdoors.
Pole Mount
Suitable when mounting the camera on vertical poles. The
camera must be enclosed inside the waterproof housing.
Corner Mount
Suitable when mounting the camera on a corner wall. The
camera must be enclosed inside the waterproof housing.
NOTE:
 For more information about the mounting solutions and accessories, please check the
Mounting Accessory Selector in our website (http://www.acti.com/mountingselector).
 The above mounting accessories are not included in the package. Contact your sales
agents to purchase.