Need help?Do you have a question about the ACTi E45 and is the answer not in the manual?
Connecting Ethernet connectors and securing the camera to the surface.
Connecting Ethernet cables using the 2-sided female type connector.
Pushing cable through ceiling and attaching camera to surface.
Assembling waterproof cable gland components for the camera and network cables.
Connecting the camera and network cables via the 2-sided female type connector.
Securing the camera to the mounting surface and adjusting its orientation.
General| Connectivity Technology | Wired |
|---|---|
| Lens Type | Fixed |
| Focal Length | 3.6 mm |
| Field of View (Horizontal) | 85.8° |
| Optical Zoom | No |
| Image Sensor Type | CMOS |
| Day/Night | Yes |
| Frame Rate | 30 fps |
| Ingress Protection | IP66 |
| Sensor Type | CMOS |
| Minimum Illumination | 0.05 Lux |
| Video Compression | H.264, MJPEG |
| Network Interface | Ethernet |
| Protocols | HTTP, TCP/IP, UDP, RTSP, SMTP, FTP, DHCP, DNS, DDNS, NTP, UPnP, Bonjour |
| Power Supply | PoE (IEEE 802.3af) |
| Power Source | PoE / DC 12 V |
| Operating Temperature | -20°C ~ 50°C |
To Next Page
