Need help?Do you have a question about the ACTi KCM-7311 and is the answer not in the manual?
Adhere to all warnings on the product and in the manual to prevent endangerment or damage.
Refer all servicing to qualified service personnel to avoid dangerous voltage or hazards.
Precautions regarding power supply compatibility and avoiding opening the product housing for safety.
Instructions for professional servicing and handling cases of product damage or malfunction.
Details about the camera's device type, sensor, resolution, minimum illumination, and IR LED.
Covers compression formats, frame rates, streaming, bit rate, and image enhancements.
Procedure for ensuring water resistance using flex conduit, sealing inserts, and properly sealing unused holes.
General| Video Compression | H.264, MJPEG |
|---|---|
| Connectivity Technology | Wired |
| Vandal Proof | Yes |
| Wide Dynamic Range | Yes |
| Image Sensor | CMOS |
| Frame Rate | 30 fps |
| Audio Support | Yes |
| Power Supply | DC 12V, PoE (IEEE 802.3af) |
| Features | Day/Night, WDR, Motion detection |
| Sensor Type | CMOS |
| Mounting Type | Wall, Ceiling |
| Protocols | TCP, UDP, HTTP, HTTPS, SMTP, FTP, NTP, DNS, DDNS, DHCP, RTSP, RTP |
| Compliant Standards | CE, FCC |
| Environment | Outdoor |
| Day/Night | Yes |
| Bit Rate | 32 Kbps - 8 Mbps |
| Network Interface | Ethernet 10/100 Base-T |
To Next Page
