Need help?Do you have a question about the ACTi KCM-7111 and is the answer not in the manual?
Adhere to all product and manual warnings to prevent danger or damage.
Refer all servicing to qualified personnel to avoid hazards.
Provides crucial safety guidelines regarding power, housing, cleaning, and environment.
Outlines the procedure to reset the device to factory defaults.
Steps to connect the IP camera, including removing the cover and connecting cables.
Instructions for connecting when DHCP is available in the network.
General| Device Type | Network camera |
|---|---|
| Sensor Type | CMOS |
| Resolution | 1920 x 1080 |
| Max Resolution | 1920 x 1080 |
| Sensor Resolution | 2 MP |
| Lens Focal Length | 3.6 mm |
| Aperture | F2.0 |
| Minimum Illumination | 0.05 Lux |
| IR Range | Up to 30 m |
| Day/Night | Yes |
| Video Compression | H.264, MJPEG |
| Frame Rate | 30 fps |
| Connectivity Technology | Wired |
| Focal Length | 3.6 mm |
| Lens Type | Fixed |
| Network Interface | 10/100Base-T Ethernet |
| Power Supply | DC 12 V |
| Features | Wide Dynamic Range |
| Protocols | ARP, TCP, UDP, ICMP, HTTP, HTTPS, FTP, DHCP, DNS, DDNS, RTP, RTSP, RTCP, IGMP |
To Next Page
