EasyManua.ls Logo

Action SPARK - Installation Instructions

Default Icon
21 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4
SPARK by Action Trampoline Climbing Bar
Installation Instructions
Please read all instructions before using your SPARK by action Trampoline and Accessories. As
the owner of SPARK by Action Trampoline, you are responsible to advise all users on the safety
instructions. For more information, contact Action Trampolines on 1800 465 070.
Keep a minimum of 5m overhead clearance when measured from the bed height to prevent users
inadvertently contacting overhead hazards such as electric wires, tree limbs and clotheslines.
Maintain a minimum clearance of 1.5 m on all sides of the trampoline. This area should not
include concrete, bitumen, brick or other hard surfaces as these can cause serious injuries if
users fall off the trampoline.
Do not locate the trampoline on top of other objects or store anything underneath the trampoline
bed.
NOTE: Children have been injured while bouncing on trampolines and landing on for example
garden tools, bicycles, etc.
Keep area surrounding the trampoline and accessories clear. Place the trampoline away from
walls, structures, fences and other play areas.
Place the trampoline in a well-lit area.
1. 5 m
TrampolineTrampoline
width
noitallatsni
tcerrocnInoitallatsni
tcerroC
1. 5 m
5 m
5 m