EasyManua.ls Logo

Action SPARK - Care and Maintenance Instructions

Default Icon
21 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5
SPARK by Action Trampoline Climbing Bar
Care and Maintenance Instructions
Components of this trampoline are susceptible to deterioration from use and environmental
conditions, such as sunlight, rain, salt and heat, to varying degrees. It is essential that you
inspect the trampoline before each use and replace any worn, defective, or missing parts before
further use. Use only parts that are recommended by the manufacturer.
POTENTIAL HAZARDS OF TRAMPOLINE COMPONENTS
Trampoline frame
Bending or breakage
of the frame
Broken, stretched or
missing springs
Sharp protrusions on
the frame
Trampoline bed
Punctures, frays, tears
or holes in the bed or
edge system
Deterioration in the
stitching or fabric
of the bed or edge
system
Sagging of the bed
Sharp protrusions
in the suspension
system elements
Frame-padding
(where required)
Missing, improperly
positioned or
insecurely attached
frame-padding
Punctures, frays,
tears, or holes in the
frame-padding
Deterioration of the
stitching or fabric of
the frame-padding
and/or its securing
system
Damaged or degraded
padding
Enclosure system
Missing, improperly
positioned, or
insecurely attached:
(a) Barrier.
(b) Barrier supports.
(c) Pole caps.
Punctures, frays,
tears, or holes in the
barrier
Damage to the
support pole padding
(when padding is
required)
Deterioration in the
stitching or fabric of
the barrier
Sagging of the barrier
Bent or broken barrier
supports
Sharp protrusions on
the barrier support
structure
Broken or damaged
enclosure entry
system