ActionTec GT701 User Manual

98
Actiontec USB/Ethernet DSL Modem User Manual
3. The Network window appears. Select Built-In Ethernet from the “Show”
drop-down list.
4. Select TCP/IP and, from the “Configure” drop-down list, select Using DHCP.
5. Click Apply Now and close the “System Preferences” application. The TCP/
IP settings are configured.
To finish setting up the computer to connect with the Modem, follow the instruc-
tions in chapter 3, “Performing a Basic Setup,” on page 29.

ActionTec GT701 Specifications

General

Brand	ActionTec
Model	GT701
Category	Modem
Language	English