ActionTec MyWirelessTV MWTV200T User Manual

3. Place the at end of the IR Blaster cable in front of the remote sensor of
the source device.
You should now be able to use the remote control of the source device
from the location of the HDTV monitor to which you are streaming
content.
Typical MyWirelessTV Connection Conguration
Transmitter
MyWirelessTV User Manual
14

ActionTec MyWirelessTV MWTV200T Specifications

General

Brand	ActionTec
Model	MyWirelessTV MWTV200T
Category	Receiver
Language	English