Troubleshooting
is chapter will describe some problems you may encounter using
MyWirelessTV, and the possible solutions to those problems. Also
included are frequently asked questions, and the answers the questions.
Frequently Asked Questions
Why can’t I see anything on the TV next to the Transmitter?
Check the cable connection from the external source (i.e., cable/
satellite set top box, Blu-ray player) to the Transmitter and from the
Transmitter out to the HDTV.
Why can’t I see anything on the TV, even though all the
cables are connected properly?
Make sure the external source device is powered on and the correct
source input is selected on your HDTV.
Why can’t I see anything on the TV next to the Receiver?
Check the cable connection from the MyWirelessTV Receiver out to
the HDTV. Also, make sure the correct source input is selected.
Why can’t I control my external source device from my
second HDTV?
Make sure the IR Blaster sensor is pointed directly to the external
source device’s IR sensor window. Also, check that the Receiver or the
IR Extender cable is in line-of-sight of the remote control.
To Next Page
Loading...
Need help?
General
