Why can’t I change my channel or volume with the
MyWirelessTV remote control?
e remote control is intended only for switching inputs, pairing
congurations, and soware updates. Use the HDTV remote control
for changing channels or adjusting volume.
Why don’t I see any video when I connect my HDMI PC or
laptop computer to MyWirelessTV?
Make sure the HDMI output display is selected from your PC or laptop.
If needed, refer to your PC or laptop’s user manual for more
information.
Why is the video quality so poor?
To improve video quality, try adjusting the orientation of the
Transmitter and/or Receiver. Use the Wireless Power Indicator (in the
MyWirelessTV’s GUI, go to Advanced Settings, then System
Information) to see what orientation works best for your situation.
Why aren’t my remote keyboard and mouse working when I
connect MyWirelessTV to my computer?
Check your cable connections. Make sure you have a USB 2.0 A to
Mini-B cable connected between your Transmitter and your computer’s
USB port.
Why am I not seeing video from my Motorola cable set top
box after seeing an HDCP warning message on my HDTV?
As of October 1, 2011, some Motorola cable set top boxes are known to
have video authentication issues with certain video devices. Check with
your cable service provider to see if a soware update is available for
your cable set top box.
MyWirelessTV User Manual
30
To Next Page
Loading...
Need help?
General
