ActionTec MyWirelessTV MWTV200T User Manual

Buttons
To navigate the GUI screens, you must use several of the buttons on the
remote control. Following is a list of the buttons needed to navigate the
GUI.
Select Source Shortcut
Pressing this button displays the possible source devices available, and
allows you select one (by pressing the Up and Down buttons on the
remote control to navigate, and selecting one by pressing the OK
button).
Menu
Pressing this button generates the Main Menu screen. If you are already
in the Main Menu screen, pressing the Menu button again returns you
to the video screen.
Direction (Up, Down, Left, Right)
Pressing one of these buttons allows you to navigate in the direction
selected within the GUI.
MyWirelessTV User Manual
18

ActionTec MyWirelessTV MWTV200T Specifications

General

Brand	ActionTec
Model	MyWirelessTV MWTV200T
Category	Receiver
Language	English