!
Duplicate
Duplicate mode is used to display the same content on both the device's
screen and the HDTV simultaneously.
Note: ere may be minor delay between the content displayed on the
HDTV screen compared to the device’s screen. is is due to the current
state of wireless display technology.
Extend
Extend mode creates a single, extended screen between the source device
and the HDTV. When in the Extend mode, dragging windows to the right
side of the device's screen displays those windows on the HDTV, while
dragging windows to the le of the HDTV screen displays them back on
the device's screen. is mode allows users to display selected content on
the HDTV, while all other windows remain on the device's screen. When
this mode is rst selected, the HDTV displays only the Windows desktop.
Second Screen Only
Second Screen Only mode causes the HDTV to be the only display for
the device. Everything will be displayed on the connected screen, and the
device’s screen will be blank.!
To Next Page
Loading...
