Installing the Receiver
is chapter explains how to connect the Receiver to an HDTV. Make
sure all the contents from the Receiver’s package are available before
starting.
Connecting to an HDTV
To connect the Receiver to an HDTV:
1. Get the Receiver, AC power adapter, and HDMI cable from the
Receiver’s package.
2. Plug one end of the supplied HDMI cable into the HDMI port
(Video Out) on the Receiver, and the other end into an available
HDMI port on the HDTV.
3. Plug the connector of the power cord to the Receiver’s power input
port labeled "5V DC", and plug the power adapter to a power outlet.
When Steps 1, 2, and 3 are complete, the hardware should be
connected as shown in the gure below:
!
To Next Page
Loading...
