Language
Select the language used by ScreenBeam.
Wireless Channel
The wireless channel on which ScreenBeam operates can be changed here. “Auto”
is recommended; this setting automatically selects the clearest channel available.
To manually select a channel:
1. Make sure the laptop/PC is disconnected from the Display Receiver.
2. Select a desired channel.
3. Click Ok.
4. Reconnect the Receiver to the laptop/PC. The selected channel will be used.
Display Content
Display Content allows ScreenBeam to be configured for an optimal viewing
experience on the HDTV. By default, “Video Playback” is selected for better video
display. Select “Presentation/Slidehsow” for a better still image display.
Adjust Screen Size
Adjusting this slider changes the size of the picture on the HDTV monitor. This
setting is useful if the picture on the HDTV screen is overscanned–that is, the
picture looks too big to fit on the screen. If this occurs, adjust the slider until the
entire picture appears on the HDTV screen.
Enable Push Button pairing
Activating this option allows devices or laptops to connect with this Display
Receiver without having to enter a Personal Identification Number (PIN).
To Next Page
Loading...
General