USER INSTRUCTION
Power traverse - Operation
WARNING:
• This equipment must be used as described in these instructions.
• When filling the tub ensure the water temperature is correct before
entering the bath.
• The seat height is operated via the remote handset.
• To lift the seat in/out of the bath (A) press and hold the following buttons. The
operation can be stopped at any time by releasing the button.
• Once the seat reaches the uppermost position the seat will automatically
traverse before lowering again.
Obstacle detection: If while lowering the seat it comes into contact with an
object, the seat will automatically stop and lift slightly. Once the object is
removed normal operation can be resumed.
Seat out Seat in
To Next Page
Loading...