10
USER INSTRUCTION
Manual traverse - Operation
WARNING:
• This equipment must be used as described in these instructions.
• When filling the tub ensure the water temperature is correct before
entering the bath.
• The seat height is operated via the remote handset.
• To lift the seat in/out of the bath (A) press and hold the seat up button. The
operation can be stopped at any time by releasing the button.
• The seat can now be moved across the bath by first ‘nudging’ it in the opposite
direction of travel to release the safety latch.
• Only after the seat has been pulled fully home across the bath can it be
lowered again (A) by pressing and holding the seat down button.
Obstacle detection: If while lowering the seat it comes into contact with an
object, the seat will automatically stop and lift slightly. Once the object is
removed normal operation can be resumed.
Seat up Seat down
A
To Next Page
Loading...