USER INSTRUCTION
Seat arm & lap strap adjust
• The seat arms are fitted or
removed by rotating the arm half
way between seat base and back
to locate the pin in the centre of
the slot as illustrated.
• The arm can then be pushed or
pulled along the mount tube.
• The seat arms can be rotated upwards
and stored in the upright position to
allow greater access to the occupant
during transfer or when in the bath.
• When the occupant is seated,
rotate the arms to the downwards
position.
• The lap strap MUST be warn
by occupant when the seat is in
motion.
• Wrap strap around the occupant
and securely over the white
buttons on both sides.
To Next Page
Loading...