8
INSTALLATION
Plumbing
Gantry attachment (Showersafe system)
The gantry attachment MUST be fitted to
the bath before the bath is located into
position.
• Remove the side panel on the opposite
side to the seat to gain access.
• Fit the gantry attachment through the top
of the tub and fix in place as illustrated.
• Attach compression fitting to the bottom
of the gantry tube and connect the supply
hose already fitted to the bath.
• Refit side panel.
Fitting own taps
When fitting third party taps to the bath they MUST ONLY be mounted in the
shaded area indicated below with the supplied flexible hoses attached.
To Next Page
Loading...