STEP 3：
STEP 4：
1. Fold up the computer as the
direction of arrow in left picture.
1. Use 5#Allen wrench (10),
Bolt(70) and lock washer(88) to lock
the right upright tube onto the base
frame.
2. Use 5#Allen wrench (10),
Bolt(62) and lock washer(88) to lock
the right upright tube onto the base
frame.
3. Left side is same as the right
side.
Notice: Please hold the uprights
with one hand, avoid to hurt
anyone.
To Next Page
Loading...
