To Next PageTo Next Page
Need help?Do you have a question about the ActronAir Classic 2 Series and is the answer not in the manual?
Verify unit, components, and accessories for damage upon shipment and check nameplate details.
Ensure installation compliance with all relevant council, state, and federal codes, regulations, and standards.
Essential practices for handling refrigerants, including recovery, recycling, and safety data sheet consultation.
Guidelines for using refrigerant recovery equipment, vacuum procedures, and proper leak testing techniques.
Detailed dimensions, unit weight, corner weights, and minimum service/airflow clearances for the CRA100S model.
Dimensions, weight, and clearance requirements for CRA130S, CRA130T, and CCA130S models.
Dimensions, weight, and clearance requirements for CRA150S, CRA150T, and CCA150S models.
Instructions for safely lifting and moving the outdoor unit using a forklift, including safety precautions.
Guidelines for piping and brazing, including equivalent pipe length and elbow fitting data.
Procedure for conducting a pressure test on the system up to 2500kPa.
Step-by-step guide for performing a triple evacuation of the refrigeration system to remove moisture.
General