To Next PageTo Next Page
Need help?Do you have a question about the ActronAir Classic 2 CRA170S and is the answer not in the manual?
General| Brand | ActronAir |
|---|---|
| Model | Classic 2 CRA170S |
| Category | Air Conditioner |
| Language | English |
Inspect unit, components, and accessories for damage upon receipt. Verify model and specs.
Ensure installation complies with relevant codes, regulations, and standards.
Procedures for responsible refrigerant handling and environmentally friendly operation.
Procedures and safety for refrigerant recovery, recycling, and handling.
Guidelines on using specialized equipment for refrigerant recovery and system evacuation.
Instructions on how to download operation manuals from the ActronAir website.
How to use NFC tags with mobile apps to access operation manuals.
Diagrams and components of control panels for single and three-phase units.
Detailed dimensions, weight, corner weights, and clearances for the CRA100S model.
Critical warning about disconnecting the earth cable before removing the access panel.
Guidelines for piping and brazing, including R-410A refrigerant precautions and elbow fitting lengths.
Explains the importance of evacuation for preventing system issues and compressor failure.
Warning about live electrical supply and the need for qualified technicians and safety precautions.
Installer's responsibility for power supply, wiring, protection devices, and earth connection.
Importance of checking voltage balance on three-phase systems to prevent motor issues.
Advice on maintaining cable clearance to minimize noise interference.
Recommended wiring configuration and maximum cable lengths for controllers and sensors.
Wiring details for connecting the LR7 wall controller to the unit.
Wiring details for optional LM-RS-2 and AERSS sensors.
Wiring and configuration for third-party control of single-speed indoor fan operation.
Wiring and configuration for third-party control of variable-speed indoor fan operation.
Performance data for EVA100S/EFA100S, showing fan power vs. static pressure and airflow.
Table listing factory charge, pre-charged length, and additional refrigerant per charge for models.
Checklist of tasks for annual maintenance inspections of electrical and mechanical components.
