EasyManua.ls Logo

ActronAir Classic 2 CRA130S User Manual

ActronAir Classic 2 CRA130S
60 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Classic Series 2
Split Ducted Unit
Installation and Commissioning Guide - Outdoor
Model Numbers
Classic Condenser Add On Cooling Only
CRA100S
CRA130S
CRA130T
CRA150S
CRA150T
CRA170S
CRA170T
CRA200T
CRA230T
CCA130S
CCA150S
CCA170S
CCA170T
CCA200T
CCA230T
IMPORTANT NOTE:
Please read this manual carefully before installing or operating your air conditioning unit.
That’s better. That’s Actron.

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the ActronAir Classic 2 CRA130S and is the answer not in the manual?

ActronAir Classic 2 CRA130S Specifications

General IconGeneral
BrandActronAir
ModelClassic 2 CRA130S
CategoryAir Conditioner
LanguageEnglish

Summary

Inspection Procedures

Safety Instructions

General Safety Guidelines

Critical safety instructions for installation, servicing, electrical, and unit operation.

Installation Information

Refrigerant Handling and Recovery

Procedures for safe refrigerant handling, recovery, recycling, and equipment use.

Service Equipment and Recovery Procedures

Using specialized equipment for refrigerant recovery and achieving low system vacuum.

Control Panel

Unit Dimensions and Clearances

08.01. CRA100S

Detailed dimensions, weight, and clearance requirements for the CRA100S model.

08.02. CRA130S / CRA130T / CCA130S

Dimensions, weight, and clearance requirements for CRA130S/T and CCA130S models.

08.03. CRA150S / CRA150T / CCA150S

Dimensions, weight, and clearance requirements for CRA150S/T and CCA150S models.

Unit Lifting Procedure

Crane Lifting Method

Safe methods for lifting the outdoor unit using crane lifting equipment.

Field Pipe Connection

11.01. Piping and Brazing

Guidelines and standards for piping and brazing with R-410A refrigerant.

Electrical Installation

Supply and Power Requirements

Requirements for power supply, wiring, circuit breakers, and RCDs.

Maximum Cable Lengths

Wiring Connections

Control Source Configuration (CtrS)

Third Party Control Input

Refrigerant Charging

19.01. Charging Method: Sub-cooling and Superheat

Explanation of charging methods using sub-cooling and superheat parameters.

Cooling and Heating Operation Adjustments

Steps for adjusting refrigerant charge for optimal performance during operation.

Sub-cooling and Superheat Checks

Procedures for checking and adjusting sub-cooling and superheat levels.

Maintenance

Maintenance Frequency Checklist

Troubleshooting Guide

System Start-Up Failures

Troubleshooting steps for when the air conditioning system fails to start.

Indoor Airflow Issues

Diagnosing and resolving issues related to lack of airflow from the indoor unit.

Insufficient Cooling/Heating Performance

Troubleshooting insufficient cooling or heating performance.

Cooling and Fan Operation Problems

Diagnosing why the compressor runs but the system does not cool, or fan issues.

Fault And Status Codes

Start Up and Commissioning Report

Related product manuals