Acura 2001 MDX User Manual

Remove the electrical connector
from the bulb by squeezing the
connector to unlock the tab, then
slide the connector off the bulb. Remove the socket from the
headlight assembly by turning it
one-quarter turn counterclockwise.
Push the electrical connector onto
the new bulb.
Insert the new bulb into the hole
and turn it one-quarter turn clock-
wise to lock it in place.
Turn on the headlights to test the
new bulb.
To remove the front turn signal
bulb, push it in slightly and turn it
counterclockwise. To remove the
side marker bulb, pull it straight
out of its socket.
Testthelightstomakesurethe
new bulb is working.
Insert the socket back into the
headlight assembly. Turn it
clockwise to lock it in place.
Install the new bulb into the
socket.
1.
2.
3.
4.
5.
3.
4.
5.
6.
Replacing Front Turn Signal/
Parking and Side Marker Light
Bulbs
Lights
Maintenance
296
TTAABB
00/08/08 15:47:30 31S3V600_301

Acura 2001 MDX Specifications

General

Brand	Acura
Model	2001 MDX
Category	Automobile
Language	English