Remove the bulb by turning it
approximately one-quarter turn
counterclockwise.
Your car uses halogen fog light
bulbs. See page for information
on replacing a halogen bulb.
Remove the electrical connector
from the bulb by squeezing the
connector to unlock the tab, then
slide the connector off the bulb.
Push the electrical connector onto
the new bulb.
Use a wrench to loosen the light
assembly’s mounting bolt.
Remove the light assembly from
the bumper.
1.
2.
3.
4.
5.
295
CONTINUED
ReplacingaFogLightBulb
Lights
Maintenance
297
CCOONNNNEECCTTOORR
BBOOLLTT
00/08/07 22:33:28 31S3V600_302
To Next Page
Loading...
Need help?
General
