Whatever type you have, follow
the child seat maker’s instructions
for adjusting or tightening the fit.
Remove the cargo area cover, and
place it on the cargo area floor
(see page ).
Lift the head restraint (see page
), then route the tether strap
through the legs of the head
restraint and over the seat-back,
making sure the strap is not
twisted.
Other LATCH-compatible seats have
a flexible-type connector as shown
above.
Place the child seat on the vehicle
seat, then attach the seat to the
lower anchors according to the
child seat maker’s instructions.
Some LATCH-compatible seats
have a rigid-type connector as
shown above.
5.
6.
4.
3.
158
133
Installing a Child Seat
46
Flexible type
Rigid type
TETHER STRAP
０７／０６／０１ １８：３６：４２ ３１ＳＴＫ６１０ ００５１
To Next Page
Loading...
