Attach the tether strap hook to the
tether anchor, then tighten the
strap as instructed by the child
seat maker.
Push and pull the child seat
forward and from side-to-side to
verify that it is secure.
To install a LATCH-compatible child
seat in the rear center seating
position, use the center lower
anchorsasshownabove.
Follow step 1 through 8 as described
previously to secure the child seat.
When you install the child seat in the
rear center seating position, you
cannotusetheseatbeltbehindthe
driver’s seat.
Remove the head restraint (see page
). Make sure the removed head
restraint is secured in the cargo area.
Reinstall the head restraint when the
child seat is removed.
7.
8.
134
CONTINUED
Using the Center LATCH
Installing a Child Seat
Driver and Passenger Safety
47
CENTER LOWER ANCHORS
TETHER STRAP HOOK ANCHOR
０７／０６／０１ １８：３６：５０ ３１ＳＴＫ６１０ ００５２
To Next Page
Loading...
