＊
＊
Connect your dock connector to
the iPod correctly and securely.
Install the dock connector to the
USB adapter cable securely.
When the iPod is connected and the
iPod mode is selected on the audio
system, the iPod indicator is shown
in the center display. If you selected
the audio control display by pressing
the AUDIO button, you will see the
iPod and USB icons on the screen.
After loading, you will see the Acura
mark on the iPod. That means you
can only operate your iPod using the
vehicle’s audio unit.
Itmaytakeafewminutesfor
the Acura mark to display on
the iPod. If the display does not
change, this function is not
supported on your iPod model
or firmware.
If the iPod indicator does not appear
in the audio display, check the
connections, and try to reconnect the
iPod a few times.
If the audio system still does not
recognize the iPod, the iPod may
need to be reset. Follow the
instructions that came with your
iPod, or you can find reset
instructions online at
The current file number and total of
the selected playable files are
displayed in the center display.
Pressing the AUDIO button displays
the artist, album and track (file)
names on the navigation screen.
2.
3.
:
www.apple.com/
ipod.
Playing an iPod (Models with navigation system)
262
USB ADAPTER
CABLE
DOCK CONNECTOR
Sample Display
OK to disconnect.
０８／０２／０６ ２１：０７：０８ ３１ＴＬ１６００ ０２６７
To Next Page
Loading...
Need help?
General
