The tensioners are designed to
activate in any collision severe
enough to cause the front airbags to
deploy.
The tensioners can also be activated
during a collision in which the front
airbags . In this case, the
airbags would not be needed, but the
additional restraint could be helpful.
When the tensioners are activated,
the seat belts will remain tight until
they are unbuckled.
For added protection, the front seat
belts are equipped with automatic
seat belt tensioners. When activated,
the tensioners immediately tighten
the belts to help hold the driver and
a front passenger in position.
If the shoulder part of the belt is
pulled all the way out, the lockable
retractor will activate. The belt will
retract, but it will not allow the
passenger to move freely.
To deactivate the lockable retractor,
unlatch the buckle and let the seat
belt fully retract. To refasten the
seat belt, pull it out only as far as
needed.
If a side curtain airbag deploys
during a side impact, the tensioner
on that side of the vehicle will also
deploy.
do not deploy
Additional Information About Your Seat Belts
Automatic Seat Belt Tensioners
Driver and Passenger Safety
21
０８／０２／０６ ２０：２７：４１ ３１ＴＬ１６００ ００２６
To Next Page
Loading...
Need help?
General
