Store a driving position only when
the vehicle is parked.
Turn the ignition switch to the ON
(II) position. You cannot add a
new driving position to the
memory unless the ignition switch
is in the ON (II) position. You can
recall a memorized position with
the ignition switch in any position.
Adjust the seat to a comfortable
position (see page ).
Press and release the SET button
on the control panel. You will hear
a beep. Immediately press and
hold one of the memory buttons (1
or 2) until you hear two beeps.
The indicator in the memory
button will come on. The current
position of the driver’s seat is now
stored.
This setting can be linked or
unlinked with the remote transmitter.
To switch the link setting, see page
.
Two seat positions can be stored in
separate memories. You select a
memorized position by pushing the
appropriate button or using the
appropriate remote transmitter
(Driver 1 or Driver 2).
Your vehicle has a memory feature
for the driver’s seat position.
3.
1.
2.
13493
U.S. TSX and Canadian TSX Premium
Storing a Driving Position in
Memory
Driving Position Memory System
142
MEMORY BUTTONS
SET BUTTON
０８／０２／０７ １７：３１：４５ ３１ＴＬ１６００ ０１４７
To Next Page
Loading...
Need help?
General
