▲▼
If the indicated required service is
not done and the remaining engine
oil life becomes 0%, the multi-
information display will show a
‘‘SERVICE PAST DUE’’ message,
thetotalmileageaftertheremaining
oillifebecame0%,andthe
maintenance item code(s).
Immediately have the service
performed, and make sure to reset
the display as described on page .
Pressing either INFO button ( / )
switches the display from the
message to another display. To see
the message again, press either
INFO button repeatedly.
This message is displayed when you
drive over 10 miles (for U.S. models)
or 10 km (for Canadian models)
after seeing the 0% message.
When you press the SEL/RESET
button to select the engine oil life,
the message ‘‘SERVICE,’’ along with
the maintenance item code(s) and
the total negative mileage after the
oil life became 0%, will be displayed
on the multi-information display.
414
Maintenance Minder
Maintenance
413
CANADAU.S.
TOTAL PAST DUE MILEAGE
MAINTENANCE ITEM CODE(S)
U.S. CANADA
TOTAL PAST DUE MILEAGE
０８／０２／０６ ２１：３２：１７ ３１ＴＬ１６００ ０４１８
To Next Page
Loading...
Need help?
General
