CONTINUED
To change the passenger’s side
bulb, start the engine, turn the
steering wheel all the way to the
left, and turn off the engine. To
change the driver’s side bulb, turn
the steering wheel to the right.
Pull the inner fender cover away
from the fender and bumper.
Remove the cover on the back of
the headlight assembly by turning
the tab counterclockwise.
Use a flat-tip screwdriver to
remove the holding clip from the
inner fender, and remove the
screw with a Phillips-head
screwdriver.
3.
4.
1.
2.
Canadian TSX
Lights
Low Beam Headlight
Maintenance
431
TAB
COVER
SCREW
HOLDING CLIP
０８／０２／０６ ２１：３５：１４ ３１ＴＬ１６００ ０４３６
To Next Page
Loading...
Need help?
General
