Navigation System 117
System Setup
4. Rotate the Interface Dial knob so
the vehicle position arrowhead is
pointing in the correct direction, and
push in on the Interface Dial. The
display will return to the previous
screen.
NOTE:
If you continually have to do this, there
are either problems in the database or
GPS reception problems. See
Accessories Precautions on page 5.
5. As you drive, the current road will be
displayed at the bottom of the screen.
Color
From the SETUP screen (Other), say
or select Color and the following
screen appears:
Map Color
Allows you to choose the map color
from one of five colors for the Day and
Night modes.
Press the CANCEL button to return to
the previous screen.
NOTE:
• Choose “White” (factory default is
Beige) as the Day color to obtain the
best daytime display contrast.
• Choose “Black” (factory default) as
the Night color to obtain the best
nighttime display contrast.
• When you select the “for Menu” tab,
you can change the menu color
setting.
To Next Page
Loading...
Need help?
General
