To stop the system’s automatic ad-
justment;
Press any button on the control
panel: MEMO, 1 or 2.
Push any of the adjustment
switches for the seat.
Shift out of Park (A/T) or into
Reverse (M/T).
Adjust the outside mirrors.
If desired, you can use the
adjustment switches to change the
positions of the seat or outside
mirrors after they are in their
memorized position. If you change
the memorized position, the
indicator light in the memory button
will go out. To keep this driving
position for later use, you must store
it in the driving position memory.
Driving Position Memory System
Instruments and Controls
102
０２／０１／０９ １４：０８：１０ ３１Ｓ３Ｍ６２０ ０１０５
To Next Page
Loading...
Need help?
General
