−
Check each of the large fuses in
the under-hood fuse box by
looking through the top at the wire
inside. Removing these fuses
requires a Phillips-head screw-
driver.Remove the cover from the fuse
box.
Turn the ignition switch to LOCK
(0). Make sure the headlights and
all other accessories are off.
If something electrical in your car
stops working, the first thing you
should check for is a blown fuse.
Determine from the chart on pages
, or the diagram on the
fuse box lid, which fuse or fuses
control that component. Check those
fuses first, but check all the fuses
before deciding that a blown fuse is
not the cause. Replace any blown
fuses and check the component’s
operation.
Check the smaller fuses in the
under-hood fuse box and all the
fuses in the interior fuse boxes by
pulling out each fuse with the fuse
puller provided in the under-hood
fuse box.
3.
1.
2.
4.
317 319
CONTINUED
Checking and Replacing Fuses
Fuses
Taking Care of the Unexpected
315
BBLLOOWWNN
FFUUSSEE
PPUULLLLEERR
FFUUSSEE
０２／０１／０９ １４：４２：２６ ３１Ｓ３Ｍ６２０ ０３１８
To Next Page
Loading...
Need help?
General
