−
Check the condition of the wiper
blades at least every six months.
Look for signs of cracking in the
rubber, or areas that are getting
hard. Replace the blades if you find
these signs, or if they leave streaks
and unwiped areas when used.
Disconnect the blade assembly
fromthewiperarmbypushingin
the lock tab. Hold it in while you
push the blade assembly toward
thebaseofthearm.
To replace the blade:
Turn the ignition ON (II), switch
the wipers to INT or (low
position), then turn the ignition
OFF when the wiper arm is
approximately midway in its travel.
Raise the wiper arm off the
windshield.
1.
2. 3.
Wiper Blades
Maintenance
262
WWIIPPEERR AARRMMSS
LLOOCCKK
TTAABB
０２／０１／０９ １４：３４：０５ ３１Ｓ３Ｍ６２０ ０２６５
To Next Page
Loading...
Need help?
General
