To change between low beams and
high beams, pull the turn signal lever
until you hear a click, then let go.
The blue high beam indicator will
light (see page ).
The rotating switch on the left lever
controls the lights. Turning this
switch to the position turns on
the parking lights, taillights, side
marker lights, and rear license plate
lights. Turning the switch to the
position turns on the
headlights.
If you leave the lights on with the
ignition switch in ACCESSORY (I)
or LOCK (0), you will hear a
reminder chime when you open the
driver’s door.
63
Headlights
Controls Near the Steering Wheel
Instruments and Controls
70
０２／０１／０９ １４：０３：１７ ３１Ｓ３Ｍ６２０ ００７３
To Next Page
Loading...
Need help?
General
