Push the electrical connector back
onto the bulb. Make sure it is on
all the way.
Turn on the headlights to test the
new bulb.
(Driver’s side)
Reinstall the radiator reserve tank.
Remove the bulb by turning it
approximately one-quarter turn
counterclockwise.
Insert the new bulb into the hole
and turn it one-quarter turn clock-
wise to lock it in place.
Open the hood.
If you need to change a bulb on
the driver’s side, remove the
radiator reserve tank.
Remove the electrical connector
from the bulb by squeezing the
connector to unlock the tab, then
slide the connector off the bulb.
3.
4.
5.
6.
7.
1.
2.
Lights
Maintenance
276
BBUULLBB
TTAABB
０２／０１／０９ １４：３６：２４ ３１Ｓ３Ｍ６２０ ０２７９
To Next Page
Loading...
