Lowerthecartothegroundand
remove the jack.
Put on the spare tire. Put the
wheel nuts back on finger-tight,
then tighten them in a crisscross
pattern with the wheel wrench
until the wheel is firmly against
the hub. Do not try to tighten
them fully.
Before mounting the spare tire,
wipeanydirtoffthemounting
surface of the wheel and hub with
a clean cloth. Wipe the hub
carefully,itmaybehotfrom
driving.
12.
13. 14.
Taking Care of the Unexpected
Changing a Flat Tire
298
BBRRAAKKEE HHUUBB
０２／０１／０９ １４：３９：５１ ３１Ｓ３Ｍ６２０ ０３０１
To Next Page
Loading...
Need help?
General
