95
uuIndicatorsu
Continued
Indicator Name On/Blinking Explanation
Vehicle Stability
Assist
TM
(VSA®)
System Indicator
●
Blinks when VSA® or trailer stability assist is
active.
—
●
Comes on if there is a problem with the
VSA® system, brake assist system, hill start
assist, starting assist brake function or trailer
stability assist.
●
Stays on constantly - Have your vehicle checked
by a dealer.
2 Vehicle Stability Assist
TM
(VSA®), aka
Electronic Stability Control (ESC), System
P. 463
2 Trailer Stability Assist P. 429
2 Hill start assist system P. 439
2 Brake Assist System P. 559
2 Starting Assist Brake Function P. 462
●
When Trailer Stability Assist Problem is
displayed on the driver information interface, the
VSA® does not activate.
●
Comes on if the VSA® system is deactivated
temporarily after the battery has been
disconnected, then re-connected.
●
Drive a short distance at more than 12 mph (20
km/h). The indicator should go off. If it does not,
have your vehicle checked by a dealer.
Vehicle Stability
Assist
TM
(VSA®)
OFF Indicator
●
Comes on when you partially disable VSA®.
2 VSA® On and Off P. 464
22 ACURA MDX-31TYA6000_02.book 95 ページ ２０２０年１１月５日 木曜日 午前１１時３９分
To Next Page
Loading...
Need help?
General
