183
uuOperating the Switches Around the Steering WheeluDriving Position Memory System
Continued
Driving Position Memory System
You can store three driver’s seat, front passenger’s seat
*
, steering wheel
*1
and door
mirror
*1
positions with the driving position memory system.
When you unlock and open the driver’s door with a remote transmitter, or keyless
access system, door mirrors adjust to one of the three preset positions
*1
and the seat
adjusts to retracted positions of one of the three preset positions automatically.
The steering wheel and the seat will move to the stored position when you set the
power mode to ACCESSORY
*1
.
When you enter the vehicle, the display briefly shows you which remote transmitter
you used to unlock the vehicle.
• DRIVER 1 transmitter is linked to memory button 1.
• DRIVER 2 transmitter is linked to memory button 2.
The driver’s seat moves rearward and steering
wheel fully up depending on the set seating
position once you
• Stop the vehicle.
• Put the transmission in
(P.
• Turn the engine off.
• Then open the driver’s door.
Once the power mode is in the ACCESSORY
position, the driver’s seat and steering wheel
moves to the DRIVER 1 or 2 preset position.
*1: Driver’s seat only
1Driving Position Memory System
Using the audio/information screen, you can disable
the automatic seat, steering wheel and door mirrors
adjustment function.
2 Customized Features P. 345
The driver’s seat easy exit feature can be turned ON/
OFF.
2 Customized Features P. 345
System Operation
The system will not operate if:
• The vehicle speed is above 3 mph (5 km/h).
• Either memory button is pressed while the seat or
steering wheel is in motion.
• The seat or steering wheel position is adjusted
while in operation.
• The memory 1, 2, or 3 position is set fully to the
rear.
• The mode selector is pressed up or down while in
operation.
Models with mode selector
* Not available on all models
22 ACURA MDX-31TYA6000_02.book 183 ページ ２０２０年１１月５日 木曜日 午前１１時３９分
To Next Page
Loading...
Need help?
General
